PROBLEM PROJECT BUILD

[Mutloob]

WHEN I PRESSS F10 FOLLOWING ERRORS ON OUTPUT WINDOW

Debug build of project `I:\Electronics\decode pudn\LED SEQ\LED SEQ.mcp' started.
Language tool versions: MPASMWIN.exe v5.41, mplink.exe v4.39, mplib.exe v4.39
Preprocessor symbol `__DEBUG' is defined.
Sat Jul 02 14:08:06 2011
----------------------------------------------------------------------
Make: The target "I:\Electronics\decode pudn\LED SEQ\Led Sequencer.o" is out of date.
Executing: "E:\Program Files\Microchip\MPASM Suite\MPASMWIN.exe" /q /p16F88 "Led Sequencer.asm" /l"Led Sequencer.lst" /e"Led Sequencer.err" /o"Led Sequencer.o" /d__DEBUG=1
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 3 : Symbol not previously defined (_config1)
Error[126]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 3 : Argument out of range (not a valid config register address)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 4 : Symbol not previously defined (_config2)
Error[126]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 4 : Argument out of range (not a valid config register address)
Warning[207] I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 1 : Found label after column 1. (bank1)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 9 : Symbol not previously defined (option_reg)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 10 : Symbol not previously defined (pie1)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 11 : Symbol not previously defined (pie2)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 12 : Symbol not previously defined (ansel)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 13 : Symbol not previously defined (txsta)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\P16F88.INC 417 : Symbol not previously defined (status)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\P16F88.INC 417 : Symbol not previously defined (rp1)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\P16F88.INC 418 : Symbol not previously defined (status)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\P16F88.INC 418 : Symbol not previously defined (rp0)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 15 : Symbol not previously defined (intcon)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 16 : Symbol not previously defined (ccp1con)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 17 : Symbol not previously defined (t1con)
Warning[207] I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 20 : Found label after column 1. (bank2)
Warning[207] I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 24 : Found label after column 1. (bank1)
Error[116]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 24 : Address label duplicated or different in second pass (bank1)
Warning[207] I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 29 : Found label after column 1. (bank0)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 31 : Symbol not previously defined (rcsta)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\INIT_NORMAL.INC 32 : Symbol not previously defined (adcon0)
Warning[207] I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 29 : Found label after column 1. (bank1)
Error[116]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 29 : Address label duplicated or different in second pass (bank1)
Warning[207] I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 35 : Found label after column 1. (bank0)
Error[116]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 35 : Address label duplicated or different in second pass (bank0)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 38 : Symbol not previously defined (Carry)
Error[128]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\LED SEQUENCER.ASM 38 : Missing argument(s)
Error[113]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\MSECDELAYS4MHZ.INC 38 : Symbol not previously defined (Zero)
Error[128]   I:\ELECTRONICS\DECODE PUDN\LED SEQ\MSECDELAYS4MHZ.INC 38 : Missing argument(s)
Halting build on first failure as requested.

I USE MPLAB 8.70

[kam]

Read Creating a new project in MPLAB, pay attention to step 10

[Mutloob]

thankyou

now all is ok

thanks again