PCB Heaven

General Category => General Discussion => Topic started by: Mosquito on April 02, 2008, 23:40:29 PM

Title: Is there something like this?
Post by: Mosquito on April 02, 2008, 23:40:29 PM
A program that can make schematics, make pcb from this, move components, autoroute and test the pcb.

Do i ask a lot?
Title: Re: Is there something like this?
Post by: spic0m on April 02, 2008, 23:41:22 PM
Not if you have alot of money  ;)
Title: Re: Is there something like this?
Post by: kam on April 03, 2008, 08:12:20 AM
I am not sure about the test thing you ask. All others are simple. Eagle can do it for example.
Title: Re: Is there something like this?
Post by: tpone on April 03, 2008, 18:42:12 PM
What do you mean "test PCB?"
 ???
Title: Re: Is there something like this?
Post by: Mosquito on April 07, 2008, 19:10:44 PM
I mean to somehow simulate the PCB to see what will it do.
Title: Re: Is there something like this?
Post by: methos on April 09, 2008, 18:37:23 PM
I know you can simulate a schematic but a pcb... i am not sure.
Title: Re: Is there something like this?
Post by: kam on April 09, 2008, 23:25:12 PM
I still do not understand what you mean "test PCB". Test the thickness of vias? Lines? What?
Title: Re: Is there something like this?
Post by: spic0m on April 11, 2008, 21:05:18 PM
I don't know if this is off topic but check the links.

http://www.openden.com/modules/weblinks/viewcat.php?cid=62

Linux guys (and girls  ;D  ;D), others don't bother.

http://lwn.net/2000/features/pcb/
http://www.drzyzgula.org/bob/electronics/linux.shtml
Title: Re: Is there something like this?
Post by: Mosquito on May 05, 2008, 20:31:42 PM
Thank you spicom