PCB Heaven

General Category => Maths, Geometry, Physics and others => Topic started by: linga on March 25, 2013, 20:39:41 PM

Title: I need c program for PIC microcontroller
Post by: linga on March 25, 2013, 20:39:41 PM
Dear All,

           I am doing a project in PIC Microcontroller in which I need to know, which basic/advanced version of PIC controller to be used? My program aim is as follows.

 I Planned to control the O/P Voltage of the Transformer automatically
through PIC Micro Controller.

This Process involves setting a reference voltage(Which is settable
and can be with Password Protection). This Voltage can be compared
with the Transformer O/P Voltage.Based on the comparison result an
actuation signal to be triggered to actuate OLTC to raise the tap so
that automatic control can be obtained.

Please guide me to achieve this through PIC Micro Controller-with C Program.

I DESPERATELY LOOKING FOR YOUR KIND HELP.

THANKS IN ADVANCE.
Title: Re: I need c program for PIC microcontroller
Post by: kam on March 27, 2013, 12:53:54 PM
O/P stands for what???
Title: Re: I need c program for PIC microcontroller
Post by: cheerio on April 02, 2013, 19:28:37 PM
output voltage i guess