PCB Heaven

General Category => Your projects => Topic started by: phpenguin on January 30, 2015, 22:27:47 PM

Title: Steel Shelving Unit under $30
Post by: phpenguin on January 30, 2015, 22:27:47 PM
(https://butterflyofdream.files.wordpress.com/2015/01/dsc_0013.jpg?w=640&h=428)

(https://butterflyofdream.files.wordpress.com/2015/01/dsc_0014.jpg?w=640&h=428)

(https://butterflyofdream.files.wordpress.com/2015/01/dsc_0015.jpg?w=640&h=428)

Dimension of the Steel shelving unit: Width 102cm, Height 120cm, Depth 40cm

Parts:
120cm angle beam x4
102cm angle beam x6
40cm angle beam x6
M5x60 bolt x24
M5 fat wasther x48
M5 lock nut x24
M5 nut x24
Cardboard

Tools:
Grinder
10 mm wrench x2
(10 mm socket, ratchet)
Cup brush x1
Visegrip x1 or C-clamp x1

Total cost
Sixteen used angle beams from a scrapyard ? 20,000 KRW
M5 fat washer x48 ? 1,200 KRW
M5x60 bolts, M5 lock nut, M5 nut ? used leftover stock

End of three angle beams form a vertex.
It needs to M5x60 bolts to fasten the vertex.
Assembly order is
M5x60 bolt
M5 fat washer
three angle beams
M5 fat washer
M5 lock nut
M5 nut

(https://butterflyofdream.files.wordpress.com/2015/01/dsc_0016.jpg?w=640&h=428)
(https://butterflyofdream.files.wordpress.com/2015/01/dsc_0017.jpg?w=640&h=428)
Title: Re: Steel Shelving Unit under $30
Post by: kam on February 03, 2015, 06:26:26 AM
Dexion shelves are awesome.   8) 8) 8)