PCB Heaven

General Category => Your projects => Topic started by: autocet on February 02, 2015, 20:48:36 PM

Title: L10, My personal PCB format
Post by: autocet on February 02, 2015, 20:48:36 PM
Hi,

I'm Jordi and my nick name is autocet, from Barcelona (Spain)

For years I make my personal way of PCB 100x40, based in a quarter of eurocard 100x160. Or half, or three quarters...

(http://www.autocet.cat/wp-content/uploads/seixanta.jpg)

My idea is to continue developing as these PCBs
If someone likes the idea, I invite you to use this format to share designs, with no restrictions like open hardware and DIY.

These restrictions are:

(http://www.autocet.cat/wp-content/uploads/L10-Restriction.jpg)

for assembling with spacers used as power bus

(http://www.autocet.cat/wp-content/uploads/separadors.jpg)

(http://www.autocet.cat/wp-content/uploads/L10-PCB-Restriction.jpg)

Or this other restrictions:

(http://www.autocet.cat/wp-content/uploads/L10-batery-Restriction.jpg)

For batery assembling over cupper bars. (for instance)

(http://www.autocet.cat/wp-content/uploads/L100Euro.jpg)

I offer a lot of ideas:

(http://www.autocet.cat/wp-content/uploads/L100c.jpg)

from a form associated instrumentation for desktop,

(http://www.autocet.cat/wp-content/uploads/CubeSat.jpg)

to a crazy way to make a CubeSat,

Since I use this format I have not never thrown away any more pcb

It could be someone interested in going along?

thanks for your answers
Title: Re: L10, My personal PCB format
Post by: kam on February 03, 2015, 06:22:07 AM
Hello autocet.
May I ask, why you decided to make pcbs only with this format? Is it practical? Any particular reason?
Title: Re: L10, My personal PCB format
Post by: cheerio on February 03, 2015, 16:33:22 PM
i like the powerbus idea for stacked applications!
Title: Re: L10, My personal PCB format
Post by: autocet on February 03, 2015, 18:01:38 PM
At least for me it is practical. Why I'am electronic for live. I'm 1961 and I studied industrial electronics. I have a vision of the world from the colour and from the development of electronic in years.

Ionization oxidant is a real problem in time. the solution is copper copper contact.  Connectors are all oxidized in ten years. I can not conceive of electronics with a very limited life. I solder wires directly to the pins.

The bus bars are a good solution to avoid the noise power cables.

I wrote a thread on Befaco forum about all this, I leave the link. If you have problems with it I will pass by the Spanish translator with my correction.

I am very synthetic

http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=770

thanks
Title: Re: L10, My personal PCB format
Post by: autocet on February 04, 2015, 21:43:02 PM
statistics @ 2/4/15

Forum: Befaco (DIY = Hazlo tu mismo)
Thread: http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=770 (http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=770)
Views: 172
Answers: 0
PM or E-mail: 0
Thread: http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=773 (http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=773)
Views: 32
Answers: 0
PM or E-mail: 0

Forum: Electro-Tech-Online
Thread: http://www.electro-tech-online.com/threads/l10-my-way-to-make-pcb.143647/ (http://www.electro-tech-online.com/threads/l10-my-way-to-make-pcb.143647/)
Views: 87
Answers: 2
PM or E-mail: 0

Forum: PCB Heaven
Thread: http://www.pcbheaven.com/forum/index.php?topic=1853.0 (http://www.pcbheaven.com/forum/index.php?topic=1853.0)
Views: 30
Answers: 2
PM or E-mail: 0

Forum: Edaboard
Thread: http://www.edaboard.com/thread331178.html (http://www.edaboard.com/thread331178.html)
Views: 102
Answers: 0
PM or E-mail: 0

Forum: Sparkfun Electronics
Thread: https://forum.sparkfun.com/viewtopic.php?f=5&t=40315 (https://forum.sparkfun.com/viewtopic.php?f=5&t=40315)
Views: 26
Answers: 0
PM or E-mail: 0

Forum: Electronics Forum
Thread: http://www.dutchforce.com/~eforum/index.php?showtopic=43312 (http://www.dutchforce.com/~eforum/index.php?showtopic=43312)
Views: 85
Answers: 2
PM or E-mail: 0

Forum: Muff Wiggler (Eurorack Modules)
Thread: https://www.muffwiggler.com/forum/viewtopic.php?t=131208 (https://www.muffwiggler.com/forum/viewtopic.php?t=131208)
Views: 374
Answers: 3
PM or E-mail: 0

Forum: Muff Wiggler (Music Tech DIY)
Thread: https://www.muffwiggler.com/forum/viewtopic.php?t=131269 (https://www.muffwiggler.com/forum/viewtopic.php?t=131269)
Views: 222
Answers: 4
PM or E-mail: 0