PCB Heaven

General Category => Maths, Geometry, Physics and others => Topic started by: ORYS on September 05, 2008, 19:50:52 PM

Title: CNCmachine-Question
Post by: ORYS on September 05, 2008, 19:50:52 PM
can i add or change programs in a Bima machine that have imawop program???????? ;D
Title: Re: CNCmachine-Question
Post by: spic0m on September 05, 2008, 19:54:52 PM
All Bimas use imawop, earlier or later varsions but its still imawop. When you make a program, you save it thus means you add it, if you open it and make some changes you change it. What exaclty do you mean?
Title: Re: CNCmachine-Question
Post by: kam on September 05, 2008, 19:56:56 PM
Or maybe you mean that you want to add G-codes on a Bima?
Title: Re: CNCmachine-Question
Post by: ORYS on September 05, 2008, 20:29:53 PM
[grammatoseires] ich weis nicht wie es heist ???
Title: Re: CNCmachine-Question
Post by: kam on September 05, 2008, 20:35:37 PM
Bitte, hier sprechen wir nur English.

[grammatoseires] heist "fonts".
Title: Re: CNCmachine-Question
Post by: spic0m on September 05, 2008, 20:37:01 PM
This is a .com forum where everyone is speaking english even if it's not their native language in order for everyone to be understood by everyone. Since you ask in english why you reply in unknown languages?
Title: Re: CNCmachine-Question
Post by: ORYS on September 05, 2008, 20:45:13 PM
thank you kam.i am very sorry about my english
Title: Re: CNCmachine-Question
Post by: ORYS on September 05, 2008, 20:51:10 PM
i have meke leters in greek(finaly).in a cnc machine for glaas and mettal sombody is working it with 3 programs.is it posible with bima?can i add in the machine fonts?????????
Title: Re: CNCmachine-Question
Post by: kam on September 05, 2008, 20:59:28 PM
i have meke leters in greek(finaly).in a cnc machine for glaas and mettal sombody is working it with 3 programs.is it posible with bima?can i add in the machine fonts?????????

I think yes. Spicom has already install some fonts for a bima machine
Title: Re: CNCmachine-Question
Post by: spic0m on September 05, 2008, 21:05:00 PM
Bima's can handle allmost any fonts available in the win-fonts directory. The problem is the change in measuring system of the machine. When changing for english to greek also the separation method for thousands changes form comma "," to dot ".", this can be destructive for the machine. Before proceeding to something like that is better advised to contact the representative and ask if possible.
Title: Re: CNCmachine-Question
Post by: ORYS on September 05, 2008, 21:07:05 PM
how spic0m?????tell me??????plzzzzzzzzzzzzzzzzzzz
Title: Re: CNCmachine-Question
Post by: ORYS on September 05, 2008, 21:10:02 PM
about the greek leters no coment?????????
Title: Re: CNCmachine-Question
Post by: ORYS on September 05, 2008, 21:17:21 PM
i forgot too ask are the jokes allowed?
Title: Re: CNCmachine-Question
Post by: kam on September 05, 2008, 21:23:26 PM
i forgot too ask are the jokes allowed?
the jokes are allowed in the jokes section.  ;D

We have a whole forum for this... It is called "fun is here". There you can sent any jokes you want.
Title: Re: CNCmachine-Question
Post by: spic0m on September 05, 2008, 21:38:33 PM
I told you, better ask the representatives technicians first if this is possible cause you can make some serious damage to the machine.
Title: Re: CNCmachine-Question
Post by: ORYS on September 06, 2008, 11:55:09 AM
 o ne more time.no coments about the greek leters??aboyt the fonts can the tecnisians, from the comrany that we buy it,do it.can i ask them?were can i find them.i dont remember the name of the company......i can find the jokes section.....
Title: Re: CNCmachine-Question
Post by: kam on September 06, 2008, 12:13:32 PM
For the greek letters, you will need to change the locale section of windows and add the Greeks.
Right now it has only english and german. You will find the locale section inside the control panel. Go there and add the greeks. Then restart im@w0p. You should then be able to write greeks.

And here is the jokes section: Fun is here (http://pcbheaven.com/forum/index.php/board,27.0.html)
Title: Re: CNCmachine-Question
Post by: ORYS on September 06, 2008, 13:14:56 PM
i have already make a panel whith greek leters :P
Title: Re: CNCmachine-Question
Post by: kam on September 07, 2008, 17:13:35 PM
i have already make a panel whith greek leters :P

May i ask how? Did you install greek fonts?
Title: Re: CNCmachine-Question
Post by: ORYS on September 18, 2008, 20:08:08 PM
i am not tell you :P
Title: Re: CNCmachine-Question
Post by: kam on September 18, 2008, 22:08:09 PM
i am not tell you :P
... But one day you will call and ask for something  :P :P :P
Title: Re: CNCmachine-Question
Post by: spic0m on September 18, 2008, 23:38:19 PM
Looooool!
Paid answer!  ;D  ;D   ;D  ;D
Title: Re: CNCmachine-Question
Post by: kam on September 21, 2008, 12:56:32 PM
 ;)
Title: Re: CNCmachine-Question
Post by: ORYS on September 23, 2008, 13:53:59 PM
ok ok just joking.if you go text milling:windows fonts then you go font name:symbol????????that is greek
Title: Re: CNCmachine-Question
Post by: spic0m on September 23, 2008, 23:52:58 PM
Heres a reference between arial and symbol for your convenience.


Title: Re: CNCmachine-Question
Post by: ORYS on September 24, 2008, 10:25:33 AM
meaning????
Title: Re: CNCmachine-Question
Post by: spic0m on September 25, 2008, 22:37:17 PM
Meaning that you can check what character you get when typing. :)
Title: Re: CNCmachine-Question
Post by: ORYS on September 27, 2008, 17:03:51 PM
spic0m,spic0m some day i will tell you all the secrets of a ima machine
 
Title: Re: CNCmachine-Question
Post by: spic0m on September 27, 2008, 18:17:36 PM
pffffffffffffffffff
Title: Re: CNCmachine-Question
Post by: kam on September 27, 2008, 20:30:30 PM
 :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D
AAAXAXAXXAAXXAAXXAXAXAXAAX A A AA A A A AOYAAAAAXAXAXAXXAXAXAXAXAXAX
AAAXAXZAXAXAXAAAXXA
AXAXAXXAAXAXAXAXAXAX AX AX AX AX AX  AXA A X A XA X A X A X A