Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: Peltire TE  (Read 17148 times)

0 Members and 1 Guest are viewing this topic.

Mosquito

  • Guest
Re: Peltire TE
« Reply #15 on: March 03, 2008, 00:49:04 AM »
so is this the solution for all problems? and why not others have use this yet? There must be some kind of problem with these things. Maybe is uncontrollable or no possible to control at all. Or maybe not very efficient

Or maybe not for continous work...

ScubaCap

  • Guest
Re: Peltire TE
« Reply #16 on: March 03, 2008, 01:09:40 AM »
Or maybe too complicated to be so popular. Or maybe TOOOOOOOOO efficient that cpu needs not too much cold.

Alex

  • Guest
Re: Peltire TE
« Reply #17 on: March 03, 2008, 12:00:30 PM »
i will give it a shot. they are not so expensive.

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Peltire TE
« Reply #18 on: March 03, 2008, 12:23:21 PM »
and let us know the results

Andre

  • Guest
Re: Peltire TE
« Reply #19 on: March 03, 2008, 12:54:33 PM »
I know that CPUs can work in higher temperatures w/o problems. My pentium is designed to work over 60. So 45 degrees would not be a problem after all. Or even 50. A simple water cooling i believe is sufficient enough.

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Peltire TE
« Reply #20 on: March 03, 2008, 14:00:30 PM »
The idea is to have it working really hard day and night.

A hard working cpu will raise temperature far more thus water cooling may not be a very good way. And after all, a cool CPU works faster than a hot one. This is a fact. It works more reliable and with less error thus much much faster.

ScubaCap

  • Guest
Re: Peltire TE
« Reply #21 on: March 04, 2008, 22:18:58 PM »
Let's me realistic. 60 degrees difference is just too much for a computer to need.

manley_V

  • Guest
Re: Peltire TE
« Reply #22 on: March 04, 2008, 23:52:47 PM »
This power may as well give you the ability, with a good controller of course, to maintain almost unchanged and stable low temp, for example 35degrees, no matter if outside is hot like hell. I like this thing!

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Peltire TE
« Reply #23 on: March 05, 2008, 08:17:38 AM »
My Man! That's the idea!  8) 8) 8) 8) 8) 8)

spic0m

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 841
Re: Peltire TE
« Reply #24 on: March 11, 2008, 00:33:15 AM »
While we are happy discovering the peltier's look what the peltiers evolving to.

http://www.nextreme.com/pages/products/etec.html

I think that this is the future.

Andre

  • Guest
Re: Peltire TE
« Reply #25 on: March 11, 2008, 07:43:56 AM »
The future is heat free chips.  :)

FelIX

  • Guest
Re: Peltire TE
« Reply #26 on: March 13, 2008, 23:13:17 PM »
The future is heat free chips.  :)

As long as they are discovered  :P

spic0m

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 841
Re: Peltire TE
« Reply #27 on: March 14, 2008, 00:09:31 AM »
lol, but for the time being that is the most we can get. It's enough for me :)

Mosquito

  • Guest
Re: Peltire TE
« Reply #28 on: March 15, 2008, 00:20:12 AM »
Sure, 60 degrees of difference should be enough for you! Where do you live? In the center of earth?

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Peltire TE
« Reply #29 on: March 16, 2008, 23:05:44 PM »
you need not to have allways TE under full load with 67 degrees difference. You need this only to cool your tank at let's say 20 degrees and then use it only when it goes over 23. This, you have an almost stable heat on the CPU. You do not need to cool it with -20 degrees!  :o