Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: Need a custom switch....  (Read 1908 times)

0 Members and 1 Guest are viewing this topic.

shocktotheweb

  • Guest
Need a custom switch....
« on: April 12, 2011, 00:30:32 AM »
Hi guys...
Here's what I need:
Circuit A is on when circuit B is off.
Circuit B is on unless amps=15 or more.

Circuit A needs to handle 50 amps.
Circuit B needs to handle 15 amps.
(would prefer to just have the positives run through this switch, 2 positives in, one out.)

email with questions/price.

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Need a custom switch....
« Reply #1 on: April 12, 2011, 00:31:51 AM »
what is the loads? Inductive or resistive? Motors or lamps?

shocktotheweb

  • Guest
Re: Need a custom switch....
« Reply #2 on: April 12, 2011, 00:37:58 AM »
Oh dear... don't understand any of that! Let me describe what I'm doing:

I have an e-bike. I have 2 separate batteries. One is an SLA 48 volt (the circuit I need 50 amps for). The other is a LifFePo. The LiFePo will only handle 15 amps. What I'm trying to do is use the LiFePo whenever I'm drawing 15 amps or less and use the SLA whenever the amperage is above that. The other issue is that I need the SLA to be on whenever the LiFePo is not, because the LiFePo will also cut out when the on-board LVC board tells it to.

Did this answer your questions?