Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: Can i print on the non-copper side of the board?  (Read 4871 times)

0 Members and 1 Guest are viewing this topic.

jbrs128

  • Guest
Can i print on the non-copper side of the board?
« on: April 02, 2008, 00:35:23 AM »
I would like to know if this is possible. I have make a pcb and i want to make the components layout and print it on the Bakelite side of the board.

I cannot make the silk screen method as i will only make one (max two) boards for each pcb. So this is not gonna be a high productive work.

Any ideas?

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Can i print on the non-copper side of the board?
« Reply #1 on: April 02, 2008, 20:51:27 PM »
You can use the toner transfer method as described in the appropriate article for toner transfer in the site. Remember to print the mirror of the image and not the image itself!

Mosquito

  • Guest
Re: Can i print on the non-copper side of the board?
« Reply #2 on: April 02, 2008, 22:52:39 PM »
WONDERFUL!

jbrs128

  • Guest
Re: Can i print on the non-copper side of the board?
« Reply #3 on: April 07, 2008, 23:14:54 PM »
It as that easy. Very good Kam. Thank you!

Mosquito

  • Guest
Re: Can i print on the non-copper side of the board?
« Reply #4 on: May 05, 2008, 20:32:46 PM »
Using a color printer should also print color eh? Or not?

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Can i print on the non-copper side of the board?
« Reply #5 on: May 15, 2008, 17:55:07 PM »
yep of-course

Mercury

  • Guest
Re: Can i print on the non-copper side of the board?
« Reply #6 on: August 06, 2008, 02:54:41 AM »
There is always also the self-sticky transparent laser film to use... A little bit more expensive but it will be an art  ;)