Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: Interfacing a telephone line to PC  (Read 6456 times)

0 Members and 1 Guest are viewing this topic.

Keep_in_mind

  • Guest
Interfacing a telephone line to PC
« on: April 05, 2008, 17:39:43 PM »
How can i put the telephone line to the sound card of a computer (like the line in jack) and record the phone?

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Interfacing a telephone line to PC
« Reply #1 on: April 06, 2008, 18:51:44 PM »
Whatever you do, use also a 1:1 coil to save your card.

Alex

  • Guest
Re: Interfacing a telephone line to PC
« Reply #2 on: April 06, 2008, 23:05:58 PM »
Check out the following diagram



This is from smart Kit. Might help you.

methos

  • Guest
Re: Interfacing a telephone line to PC
« Reply #3 on: April 07, 2008, 18:55:41 PM »
And add this 1:1 coil that Kam said before.

SiEger

  • Guest
Re: Interfacing a telephone line to PC
« Reply #4 on: April 10, 2008, 20:51:15 PM »
And add this 1:1 coil that Kam said before.

Please what is this coil?

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Interfacing a telephone line to PC
« Reply #5 on: April 11, 2008, 00:20:05 AM »
This coil is a high frequency transformer. it will not allow DC current to pass and also the secondary coil has no galvanic connection with the first coil and thus it will prevent the PC to leak or get an current to or from the ground (earth)

Keep_in_mind

  • Guest
Re: Interfacing a telephone line to PC
« Reply #6 on: April 19, 2008, 12:48:31 PM »
Thank you people!

Actually i found a ready construction for this. I believe is much more safer  ;)

methos

  • Guest
Re: Interfacing a telephone line to PC
« Reply #7 on: April 19, 2008, 18:43:18 PM »
No it may not be.

I would 100% prefer something made by me. Because the ready one may be cheap because it (for example) does not have the 1:1 coil...