Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: ENC28J60 Module from ebay Need Information...  (Read 4725 times)

0 Members and 1 Guest are viewing this topic.

_pike

  • Administrator
  • Full Member
  • *****
  • Posts: 182
ENC28J60 Module from ebay Need Information...
« on: November 27, 2012, 10:47:57 AM »
Dear friends recently i bought a ethernet module from ebay....

http://www.ebay.com/itm/ENC28J60-Ethernet-LAN-Network-Module-Schematic-For-Arduino-SPI-AVR-PIC-LPC-STM32-/180961458813?pt=LH_DefaultDomain_0&hash=item2a2224ba7d

I would like some info for this module...I need a guide of how this module can start-up and communicate through ethernet with a pc... (If i am wrong somewhere please correct me)
Just for now i know that this module will communicate with a microcontroller through the spi bus and the ethernet module will communicate with pc through  TCP/IP protocol....
I also know that creating TCP/IP protocol for this chip (ENC28J60) is pain in the ass, but microchip has a  TCP/IP protocol  ready to embed.
Here is the link for the latest TCPIP Stack v5.42.02......   

http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2896


I would like a "guide" for helping me out since i don't know how to embed the stack to my mcu and also i am not familiar with PHP or HTML  languages where a page must be created in order to communicate through an ip address the pc with my mcu...


Thanks in advance Panagiotis.

George

  • Jr. Member
  • **
  • Posts: 73
Re: ENC28J60 Module from ebay Need Information...
« Reply #1 on: November 27, 2012, 16:18:32 PM »
Sparkfun also sell one based on the enc28j60, Ethernet Interface Board - ENC28J60
BOB-00765, comments under the listing show a reference - see this link: http://lab.robomotic.com/hardware-stuff/34-arduino-stuff/55-mini-ether-module
you can use their librarie!

I hope that helps a little

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: ENC28J60 Module from ebay Need Information...
« Reply #2 on: November 28, 2012, 17:04:20 PM »
special honors for the first who will build this and shares his library with us! 8) 8) 8) 8) 8) 8) 8)

cheerio

  • Sr. Member
  • ****
  • Posts: 306
Re: ENC28J60 Module from ebay Need Information...
« Reply #3 on: November 28, 2012, 18:46:25 PM »
planned this as an Interface for my smartEnergyMeter. But i did not begin the project yet. It would be awesome if i could use a lib :D

_pike

  • Administrator
  • Full Member
  • *****
  • Posts: 182
Re: ENC28J60 Module from ebay Need Information...
« Reply #4 on: November 28, 2012, 19:30:24 PM »
I think that i'm going in a correct direction..... :o :o :o :o :o :o
Be patient hope to make it work soon.....    8) 8)  8)

_pike

  • Administrator
  • Full Member
  • *****
  • Posts: 182
Re: ENC28J60 Module from ebay Need Information...
« Reply #5 on: November 29, 2012, 00:42:33 AM »
« Last Edit: November 29, 2012, 01:07:17 AM by _pike »

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: ENC28J60 Module from ebay Need Information...
« Reply #6 on: November 29, 2012, 08:42:10 AM »
make me proud