Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: HELP WITH PCB LAYOUT  (Read 2980 times)

0 Members and 1 Guest are viewing this topic.

worlda

  • Newbie
  • *
  • Posts: 7
HELP WITH PCB LAYOUT
« on: November 18, 2012, 00:41:34 AM »
HI ALL

I make a circuit for 12vdc with one switch to go 12 postive then hit button goes 12 neg
but I do not know how to do PCB layout can anyone help me with this layout
I attached to pic if the circuit any help please thanks so much

Charlie


_pike

  • Administrator
  • Full Member
  • *****
  • Posts: 182
Re: HELP WITH PCB LAYOUT
« Reply #1 on: November 18, 2012, 10:05:54 AM »
If you are not in a hurry i will help you out....I use eagle from cadsoft i can dsigh you the pcb but do you want only the desigh or the development also?I can help you only for the desigh....

worlda

  • Newbie
  • *
  • Posts: 7
Re: HELP WITH PCB LAYOUT
« Reply #2 on: November 18, 2012, 11:53:49 AM »
Thanks for Getting back to me
All a need is the Bottom Artwork (solder side) and Invert Artwork so I can make a PCB of it
I am a Biosafety eng and know circuit design but I do not know much about PCB artwork

Thanks
Charlie :D

worlda

  • Newbie
  • *
  • Posts: 7
Re: HELP WITH PCB LAYOUT
« Reply #3 on: November 18, 2012, 13:06:21 PM »
hi

I just downloaded a trial copy of eagle all I need id the file and I can print it and so on

Thanks so much

Charlie

cheerio

  • Sr. Member
  • ****
  • Posts: 306
Re: HELP WITH PCB LAYOUT
« Reply #4 on: November 18, 2012, 16:41:17 PM »
how many switch cylces do you want this to manage? If you do not use a high quality relay you may want to calculate how long this thing will live.

worlda

  • Newbie
  • *
  • Posts: 7
Re: HELP WITH PCB LAYOUT
« Reply #5 on: November 18, 2012, 21:16:49 PM »
I have the circuit fully working all I need is help with a PCB design with the attachment I posted

thanks to all

cheerio

  • Sr. Member
  • ****
  • Posts: 306
Re: HELP WITH PCB LAYOUT
« Reply #6 on: November 21, 2012, 22:15:40 PM »
if you really are an engineer you should be able to learn basic eagle in less than 1 hour....

cheerio

  • Sr. Member
  • ****
  • Posts: 306
Re: HELP WITH PCB LAYOUT
« Reply #7 on: November 22, 2012, 23:12:31 PM »
you probably want to do it yourself...
size notes are in mm

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: HELP WITH PCB LAYOUT
« Reply #8 on: November 23, 2012, 22:37:27 PM »
hehehehehe cheerio ;D ;D ;D ;D ;D