Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: PWM  (Read 2568 times)

0 Members and 1 Guest are viewing this topic.

Jpk

  • Guest
PWM
« on: October 04, 2012, 18:59:32 PM »
I am a construction equipment service trainer and our products use PWM to actuate a hydraulic control valve and is controlled by the UCM on board from a command from the joystick
My question is what would the voltage be going to the actual coil of the valve ...5 volts or less? or system voltage which is 12 volts?

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: PWM
« Reply #1 on: October 05, 2012, 09:43:41 AM »
there are coils from 5 to 220 volts, AC or DC... It is printed on the coil.