L10, My personal PCB format

[autocet]

Hi,

I'm Jordi and my nick name is autocet, from Barcelona (Spain)

For years I make my personal way of PCB 100x40, based in a quarter of eurocard 100x160. Or half, or three quarters...



My idea is to continue developing as these PCBs
If someone likes the idea, I invite you to use this format to share designs, with no restrictions like open hardware and DIY.

These restrictions are:



for assembling with spacers used as power bus





Or this other restrictions:



For batery assembling over cupper bars. (for instance)



I offer a lot of ideas:



from a form associated instrumentation for desktop,



to a crazy way to make a CubeSat,

Since I use this format I have not never thrown away any more pcb

It could be someone interested in going along?

thanks for your answers

[kam]

Hello autocet.
May I ask, why you decided to make pcbs only with this format? Is it practical? Any particular reason?

[cheerio]

i like the powerbus idea for stacked applications!

[autocet]

At least for me it is practical. Why I'am electronic for live. I'm 1961 and I studied industrial electronics. I have a vision of the world from the colour and from the development of electronic in years.

Ionization oxidant is a real problem in time. the solution is copper copper contact.  Connectors are all oxidized in ten years. I can not conceive of electronics with a very limited life. I solder wires directly to the pins.

The bus bars are a good solution to avoid the noise power cables.

I wrote a thread on Befaco forum about all this, I leave the link. If you have problems with it I will pass by the Spanish translator with my correction.

I am very synthetic

http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=770

thanks

[autocet]

statistics @ 2/4/15

Forum: Befaco (DIY = Hazlo tu mismo)
Thread: http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=770
Views: 172
Answers: 0
PM or E-mail: 0
Thread: http://befaco.org/forum/phpBB3/viewtopic.php?f=22&t=773
Views: 32
Answers: 0
PM or E-mail: 0

Forum: Electro-Tech-Online
Thread: http://www.electro-tech-online.com/threads/l10-my-way-to-make-pcb.143647/
Views: 87
Answers: 2
PM or E-mail: 0

Forum: PCB Heaven
Thread: http://www.pcbheaven.com/forum/index.php?topic=1853.0
Views: 30
Answers: 2
PM or E-mail: 0

Forum: Edaboard
Thread: http://www.edaboard.com/thread331178.html
Views: 102
Answers: 0
PM or E-mail: 0

Forum: Sparkfun Electronics
Thread: https://forum.sparkfun.com/viewtopic.php?f=5&t=40315
Views: 26
Answers: 0
PM or E-mail: 0

Forum: Electronics Forum
Thread: http://www.dutchforce.com/~eforum/index.php?showtopic=43312
Views: 85
Answers: 2
PM or E-mail: 0

Forum: Muff Wiggler (Eurorack Modules)
Thread: https://www.muffwiggler.com/forum/viewtopic.php?t=131208
Views: 374
Answers: 3
PM or E-mail: 0

Forum: Muff Wiggler (Music Tech DIY)
Thread: https://www.muffwiggler.com/forum/viewtopic.php?t=131269
Views: 222
Answers: 4
PM or E-mail: 0