Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: PIC Frequency-Change Capacitance Touch Button  (Read 3257 times)

0 Members and 1 Guest are viewing this topic.

JULIO ROJAS

  • Newbie
  • *
  • Posts: 3
PIC Frequency-Change Capacitance Touch Button
« on: November 09, 2015, 04:30:11 AM »
friend goodnight.
I apologize for disturbing and not let it rest my name is Julio Rojas I am from Bogota Colombia I e been looking at projects that you have performed and there is one in particular that I find very interesting is the capacitive sensor with pic12f615 to arm and put it in my room but I have a problem is that here in Colombia the pic12f615 is not achieved then wanted to ask a favor if I can help modifying the program to a different pic eg PIC12F629 or PIC12F675 are those in electronics stores if so friendly and I can do this please thank him immensely.
God bless you.
this is my email: julroj07@hotmail.com

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: PIC Frequency-Change Capacitance Touch Button
« Reply #1 on: November 09, 2015, 10:36:14 AM »
Hello Julio,
changing the program takes a lot of time, and time is something that I have not unfortunately. You could order the chip through internet maybe? Like farnel or rs?

JULIO ROJAS

  • Newbie
  • *
  • Posts: 3
Re: PIC Frequency-Change Capacitance Touch Button
« Reply #2 on: November 09, 2015, 14:54:57 PM »
Friend thank you very much for your reply

ok I understand that your time is valuable pic12f615 will ask the internet. I will give another question that you can change the time when in programmable button that is if you can put a potentiometer or variable resistor on pin 4 which is available for this resistance control output activation time and mode shape timed. I mean that when you run your hand over the sensor switch the output according to the time in the variable resistor but only mode and push mode on / off rule

thank you very much that God continue to bless.

and congratulations for all those projects you have.

Thank you

JULIO ROJAS

  • Newbie
  • *
  • Posts: 3
Re: PIC Frequency-Change Capacitance Touch Button
« Reply #3 on: December 03, 2015, 04:32:30 AM »
Very good friend days

again I am communicating to congratulate him on the excellent project already and I have gotten the pic12f615 ye been testing and works very well just wanted to ask a question of the same project can be done to have two sensor inputs and two outputs bone with a brisk output and the other sensor activates the other exit could be used as a double switch thank you very much and I look forward to a prompt response God bless him.

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: PIC Frequency-Change Capacitance Touch Button
« Reply #4 on: December 03, 2015, 09:00:48 AM »
Hello Julio,

This project can only hold one input/output. But you can check this one as well with the 16F1937
http://www.pcbheaven.com/circuitpages/PIC_Capacitance_Sensor_with_Multitouch_Function/

Nevertheless, you can well add 2 12F615 one for each of your channels...