Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: 555 Breathing (Pulsing) LED  (Read 2146 times)

0 Members and 1 Guest are viewing this topic.

ronwireland

  • Cadet
  • Posts: 1
555 Breathing (Pulsing) LED
« on: February 14, 2016, 14:13:11 PM »
Hello

I am new to this forum and new to electronics.

I am currently trying to build the 555 Breathing (Pulsing) LED and the most I can get is the LED comes on and then goes off and that is it.. I see looking at the photo of the breadboard there are 2 resistors that seem to nowhere, 1 off pin3 and 2 toward the bottom right corner? The only other change on mine is the 2N2222, I am using a 2N2222A. Also have slightly different potentiometer but they are 10K. Can someone please help?

Ron

urameshix

  • Cadet
  • Posts: 1
Re: 555 Breathing (Pulsing) LED
« Reply #1 on: October 12, 2017, 15:30:11 PM »
Good Morning all,

I have exactly the same problem. It lights up once, and then stays off all the time.
I checked the voltage in the capacitor, and it's changing due to 555, but led does not light up.

I also tried to connect directly the led with a resistor to pin 3, and it blinks well.

Video here: https://youtu.be/XInVuIA9g8c








Any idea?

Regards
« Last Edit: October 12, 2017, 15:48:13 PM by urameshix »