Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: 3 phase motor megger testing  (Read 432 times)

0 Members and 1 Guest are viewing this topic.

Greg

  • Cadet
  • Posts: 1
3 phase motor megger testing
« on: November 02, 2017, 04:36:42 AM »
I have a 3 phase motor   When testing with a megger do you only test from each winding to ground.
When I do a ohm meter test of the 6 wires I get a reading wirer  green 1&2.  9.7ohm       White  3&4.  9.7 ohm          Yellow  5&6   9.7 ohm readings .
This is the order in witch they wer connected to the terminal block.
When I connect any black wirer or white wirer in any order I get a ohm reading between 17 and 10 ohm  black to black or white to white black to white.
I do not under stand this layout.
Are all the wind endings going inside.
The windings do not go to earth.
Grer