Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: Analog temperature measurement  (Read 12934 times)

0 Members and 1 Guest are viewing this topic.

tpone

  • Guest
Analog temperature measurement
« on: March 02, 2008, 11:00:50 AM »
I happen to have a temperature sensor for temperatures up to 600 degrees C. But this sensor is not for connecting it to a pic. I measure the resistance and i figured that it changes on the temperature change.

How can i display the temperature on an lcd? What can i use?

kostas

  • Guest
Re: Analog temperature measurement
« Reply #1 on: March 02, 2008, 13:22:10 PM »
Use an A2D converter

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Analog temperature measurement
« Reply #2 on: March 02, 2008, 15:07:23 PM »
or use the PIC 16f88 that has built in a2d and can be directly connected to your display! neat!

ScubaCap

  • Guest
Re: Analog temperature measurement
« Reply #3 on: March 02, 2008, 16:17:18 PM »
Actully, all these sensor happen to have an output of 0-10 or 4-10 or 4-20 or something like this, that means 0 to 10 mA scale or 4 to 20 mA scale or 0 to 10 volts scale.

If you can find some more info you can have the exact result you want. If for example this is a linear probe for temperatures 0 to 600 degrees with output 4-20mAmperes, means that with 24Vdc (or 12 or whatever it needs) it will sent 4mA when 0 degrees and 20 mA when 600 degrees. This you must figure out.

tpone

  • Guest
Re: Analog temperature measurement
« Reply #4 on: March 02, 2008, 16:31:59 PM »
I have no specification for this. is there a way to find out what the hell is it?

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Analog temperature measurement
« Reply #5 on: March 02, 2008, 22:56:56 PM »
With the ancient method of try and error.
Make some tens of measurements for different temperatures

ScubaCap

  • Guest
Re: Analog temperature measurement
« Reply #6 on: March 03, 2008, 01:06:41 AM »
and you have a long way in front of you! Better leave this all day with an ohmmeter or an ammeter (better) and some 24V or 12V supply, and have a simple thermometer. Every 30minutes or every hour mark the temperature and the amperage. This will give you some results.

In worst case, if you do not find anything with these results,post them here and maybe we can help you.

tpone

  • Guest
Re: Analog temperature measurement
« Reply #7 on: March 04, 2008, 16:29:56 PM »
I think i found the best solution! I will use a magical IC that measures both temperature and humidity and also is much more precise. I do not need 600 degrees! I hope my pc will never get that hot. If it does i will sure won't look the temperature  :)

Andre

  • Guest
Re: Analog temperature measurement
« Reply #8 on: March 04, 2008, 19:24:57 PM »
Of course is the best solution as long as it covers your needs. Check the Humidity and Temperature Sensor - FOST02
Is cheap (less than 10E) end very good. I took 3 for my house!

tpone

  • Guest
Re: Analog temperature measurement
« Reply #9 on: March 20, 2008, 02:40:15 AM »
This is a really eet gadget! I took a couple of them for test and i love it. I hope they are accuarate enough  ;) ;)

Erkeli

  • Guest
Re: Analog temperature measurement
« Reply #10 on: March 20, 2008, 16:28:46 PM »
But their accuracy is standard, very good, and written to it's manual... Check it out.

kourt

  • Guest
Re: Analog temperature measurement
« Reply #11 on: March 27, 2008, 17:35:23 PM »
FOR TEMPERATURES MORE THAN 400 DEGREES ,THE RIGHT SENORS TYPES ARE THE THERMOCOUPLES.THE SIIGNAL THAT YOU HAVE FROM THESE SENSORS IS A FEW mVolts.THERE ARE ABOUT TEN TYPES OF THERMOCOUPLES.FOR EXAMPLE : TYPE K ( NICKEL - CHROMIUM),TYPO T (  COOPER-NICKEL ), TYPE E ,TYPE R ( PLATINUM , TYPE Y , TYPE J etc.  . IF SOMEONE NEEDS I HAVE ALL THE TABLES , FOR ALL TYPES OF THERMOCOUPLES , WHICH YOU CAN SEE THE RELATION BETWEEN TEMPERATURE AND mVolts.
 SO, FIRST OF ALL YOU MUST LEARN WHAT TYPE OF THERMOCOUPLE YOU HAVE AND AFTER YOU CAN USE ONE  TEMPERATURE TRANSMITTER AND YOU WILL HAVE AN ELECTRIC SIGNAL 4-20mA.

FINAL THERE ARE SOME TEMPERATURES CONTROLLERS WHICH THEY TAKE FOR INPUT ALL THE TYPE OF THERMOCOUPLES , AND THESE CONTROLLERS HAVE DISPLAY, ALSO THEY HAVE TWO OUTPUTS RELAYS
IF YOU WANT TO USE THEM.( EXAMPLE TYPES FOR CONTROLLERS : JUMO , YAMATAKE , SELCO

tpone

  • Guest
Re: Analog temperature measurement
« Reply #12 on: March 27, 2008, 22:16:36 PM »
Thanx Kourt for you answer.

I would like to advice you something. Writing in capital letters in forums or chat is... as per savoir vivre, is extremely rude and also very difficult to read.

What you post is very interesting and of course all of us would like to share knowledge, that's why forum exists after all. So if you have any tables or data, send them either to the forum by post or contact administrator (his id is kam) and send him by emal so he can make a new page with your supply data.

Actually, we all try to make this site better. That is the idea.

The solution i gave is by using the Maxim DS1621 that can measure digitally from -15 to +105 degrees C with great accuracy (0.5 degrees step) and error less than 0.2 degrees.

spic0m

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 841
Re: Analog temperature measurement
« Reply #13 on: March 28, 2008, 00:34:10 AM »
WHY DO YOU SHOUT? In foroum writting, capitals mean that you are screaming to us, please don't do that.

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Analog temperature measurement
« Reply #14 on: March 28, 2008, 00:46:53 AM »
lol ok. i think he got the point.