Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: My first pcb  (Read 5695 times)

0 Members and 1 Guest are viewing this topic.

jbrs128

  • Guest
My first pcb
« on: March 25, 2008, 09:02:34 AM »
Allright, i took a decision.

I will make my first pcb. I have a first question thought. I google aroung (and ofcourse your site) and saw that there are several kinds of boards with different thickness of coper.

What should i get for start? And what is the difference?

FelIX

  • Guest
Re: My first pcb
« Reply #1 on: March 28, 2008, 01:46:53 AM »
Good decision and we are here to help.

Start with a normal PCB, that should be 1 oz/ft2

As a matter of fact, it is important when you have hi current running on the pcb. otherwise, choose a thin copper layer so you will have faster etching and of course the etchant will last more.


Erkeli

  • Guest
Re: My first pcb
« Reply #2 on: March 28, 2008, 09:47:56 AM »
You must ask for special pcb in case you want special pcb otherwise you will get 1oz

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: My first pcb
« Reply #3 on: March 28, 2008, 23:11:19 PM »
How much current will run copper?

jbrs128

  • Guest
Re: My first pcb
« Reply #4 on: March 29, 2008, 08:16:12 AM »
I do not know but i suppose not much. Just a simple circuit. Not high voltages or things.

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: My first pcb
« Reply #5 on: March 31, 2008, 21:55:15 PM »
Just a simple board like felix advised.

jbrs128

  • Guest
Re: My first pcb
« Reply #6 on: April 02, 2008, 00:19:53 AM »
Thank you all people!  ;)