Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: Firmware problem  (Read 6274 times)

0 Members and 1 Guest are viewing this topic.

kourt

  • Guest
Firmware problem
« on: November 27, 2009, 10:57:27 AM »
Hallo. :)
I have a problem with a touch panel and if someone knows something i'll aprreciate it.
As i told you i have a touch panel BEIJER E-615.The firmware of this panel is 6.03.When i try to upload a programm in this panel , e-designer ( the programming software ) ask me for a new firmware 6.10 Version.My question is how can i convert the old version to the new ? (I hope you understood my description of my problem  :)  )Thanks

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Firmware problem
« Reply #1 on: November 28, 2009, 08:15:58 AM »
I do not think you can 'convert'. Instead, you need to 'upload' the new firmware. Do you have it? Or better, do you have access to a source that supplies this new firmware?


In any case, i would rather downgrade the e-designer (use an older version for example) rather than upgrading the firmware.

kourt

  • Guest
Re: Firmware problem
« Reply #2 on: November 28, 2009, 09:22:37 AM »
Yes you are right , i must upload the new firmware.I found one site e-terminals.com but i don't know how to make the upload.
Also i have already check to upgrade an old version of e-designer but i stll have the same problem.KAM HELP ;) ;)

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Firmware problem
« Reply #3 on: November 29, 2009, 12:27:34 PM »
Send details of the screen and spic0m will find yout eh proper wire for uploading firmware.

spic0m

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 841
Re: Firmware problem
« Reply #4 on: November 29, 2009, 13:42:04 PM »
Huh? I can't understand the problem. You have the firmware but no means (cables) to upload it? You don't have the firmware? You upload the firmware but it is not accepted?
Be more specific please.

kourt

  • Guest
Re: Firmware problem
« Reply #5 on: November 29, 2009, 21:04:00 PM »
Spicommmm
loook
I have a touch panel Mitsubhi, beijer E-615 Landscape.
This panel has  firmware  V6.02c.
I can not communicate with the panel because the firmware of the software that i use is V6.10,
so i must upgrade the firmware of the panel.
I found an older version of the software  ( E-designer is the software )
i installed it but i had the same problem.
I found this link http://www.meau.com   but.......
 So what you think?

spic0m

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 841
Re: Firmware problem
« Reply #6 on: November 29, 2009, 21:10:14 PM »
Sorry but i still can't understand. You want new firmaware for the screen but you installed older software?
The link wasn't much helpfull to your problem.
And i ask again: You have the new firmware for the screen?
If you have it, can you upload it?

kourt

  • Guest
Re: Firmware problem
« Reply #7 on: November 29, 2009, 21:13:14 PM »
 I don't have it.
This is my problem.

spic0m

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 841
Re: Firmware problem
« Reply #8 on: November 29, 2009, 21:16:29 PM »
Good, so you need the new firmware for the screen, ver 6.10 if i'm correct?
And how you plan to upload it?

kourt

  • Guest
Re: Firmware problem
« Reply #9 on: November 29, 2009, 21:21:15 PM »
That's right.
I suppose that i will connect direct the panel with the pc with rs-232 and i do the uploading

spic0m

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 841
Re: Firmware problem
« Reply #10 on: November 29, 2009, 22:03:52 PM »
I think you refer to the MELSEC MAC E615 panel

kourt

  • Guest
Re: Firmware problem
« Reply #11 on: November 29, 2009, 22:50:22 PM »
That's right. ;)

spic0m

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 841
Re: Firmware problem
« Reply #12 on: November 29, 2009, 23:16:02 PM »
Hmmm, i think you have a problem here. Those things cannot update the firmware. Give me a day or so to check it out.

kourt

  • Guest
Re: Firmware problem
« Reply #13 on: November 29, 2009, 23:17:39 PM »
Thanks  ;)
I hope the best

kam

  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Firmware problem
« Reply #14 on: November 30, 2009, 21:56:26 PM »
Spic0m AKA "Der Suchemeister"  ;D