Home     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
 Home     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

Author Topic: Free PCB Cad program  (Read 5188 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
Free PCB Cad program
« on: August 30, 2008, 18:15:41 PM »
Until today, i draw my pcb on paper and use a several methods to make them. Now i use photographic method (as described very good here Photographic method creating PCB.

I want to try my luck on a PCB creating program but i want to pay as less as possible. Better to be free. Is there any like this?



  • Administrator
  • Hero Member
  • *****
  • Posts: 1849
Re: Free PCB Cad program
« Reply #1 on: August 30, 2008, 20:16:14 PM »
There is a free and good one here:

And also you may try the eagle lite version. It has a few limiatations, perhaps not to bother you.


  • Guest
Re: Free PCB Cad program
« Reply #2 on: May 21, 2010, 14:38:25 PM »
I found expresspcb to be very easy to use and its free


  • Guest
Re: Free PCB Cad program
« Reply #3 on: March 10, 2011, 17:26:25 PM »
If you are new to PCB Cad, I recommend Express PCB.

It is easy, easy, easy to use. But it does has its draw backs.

If you want a full feature PCB Cad program, and will want to move up and on to using prime auto routers. Then get Target 3000 v.15. It is free, has no board size limits, but is limited to 250 pins. But also, it will introduce you to the Electra Auto Router, with a pin limit of 250.