Home     Contact     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
 Home      Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

<< Back to INDEX

New FlatPower, low leakage Schottky barrier rectifiers in SOD123W [News]
posted June 11 2014 9:58.49 by spic0m

NXP introduces the first two 60 V low leakage Schottky barrier rectifiers in the FlatPower SOD123W package. PMEG6010ELR and PMEG6020ELR offer a reverse voltage of 60 V and average forward currents of 1 A and 2 A. They also offer a low reverse current of 1 µA at 60 V and low forward voltage drops of 660 mV and 760 mV. Capable of temperatures up to 175°C and AEC-Q101 qualified, these Schottky barrier rectifiers offer a reduced leakage current, even at high temperatures. This makes them ideal for automotive applications such as airbags, ABS and engine control systems.

Thanks to clip bond technology the FlatPower SOD123W package offers higher power capabilities on a small footprint of only 2.6 x 1.7 mm. Together with a height of only 1 mm, the small package size makes these devices especially suitable for designs where high performance in limited space is needed.

These diodes are the first in a series of Schottky rectifiers in FlatPower packages SOD123W and SOD128.

[Link: NXP Semiconductors]

You might also like...

Want more out of Raspberry Pi? -try Banana Pi [News]

The Titanic will sail again (for real) ! [News]

Smartwatch of the Future is Controlled by Moving its Face [Innovation]

Nobel Prize for the Next Gen of White LED Lamps [News]

Say Hello to the new Raspberry Pi Model A+ [News]

A comet may appear surprising bright in March 2013 [Space]

This machine scans the fruits with a spectrometer [Inventions]

Bee venom may cure HIV [Health]

<< Back to INDEX



  Email (shall not be published)


Notify me of new posts via email

Write your comments below:
BEFORE you post a comment:You are welcome to comment for corrections and suggestions on this page. But if you have questions please use the forum instead to post it. Thank you.


No comment yet...

Be the first to comment on this page!

 Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS   

Site design: Giorgos Lazaridis
© Copyright 2008
Please read the Terms of services and the Privacy policy