Home     Contact     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
 Home      Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

<< Back to INDEX

Your next fridge could keep cold more efficiently using magnets [Innovation]
posted February 17 2014 4:01.56 by spic0m

The fridge is the most common of common household appliances. Despite improvements in efficiency over the years, they remain one of the biggest users of electricity in the home, relying on chemical refrigerant and a compressor to transfer heat from the inside to the outside of the fridge. GE researchers have now developed a new type of refrigeration technology using magnets that is more environmentally friendly and is predicted to be 20 to 30 percent more efficient that current technology ... and it could be in household fridges by the end of the decade.

Magnetic refrigeration is not a new idea. Ever since German physicist Emil Warburg observed in the 1880s that certain materials changed temperature when exposed to a changing magnetic field 13 known as the magnetocaloric effect 13 there have been efforts to create refrigerators based on the technique.

Such magnetic refrigeration systems were developed as far back as the 1930s, and researchers at the Los Alamos National Laboratory (LANL) in New Mexico successfully achieved a few degrees of refrigeration in the 1980s. However, the technology has failed to make it into household refrigerators as it relies on superconducting magnets that themselves need to be cooled to extremely low temperatures, making it not cost- or energy-efficient for household use.

GE teams in the US and Germany turned their collective efforts to the task a decade ago and built a cascade from special magnetic materials. Each step of the cascade lowered the temperature slightly but after five years of work they were only able to realize cooling of just 2° F (-16.7° C) with a prototype that Michael Benedict, design engineer at GE Appliances, describes as a "huge machine."

A breakthrough then came courtesy of the research team's materials scientists who developed a new type of nickel-manganese alloys for magnets that could function at room temperatures. By arranging these magnets in a series of 50 cooling stages, the team have managed to reduce the temperature of a water-based fluid flowing through them by 80° F (26.7° C) with a device that is, according to Benedict, "about the size of a cart."

[Link: gizmag]

You might also like...

Supernova! Exploding star lights up nearby Cigar Galaxy [Space]

DIY Variable bench power supply [Project]

30 volts Panel Volt Meter Using PIC MCU [Project]

Digital Clock Using 7 Segment Display controlled using TV Remote [Project]

How A Virus Invades Your Body [Video]

The mystery of motion sickness [Knowledge]

Cicadas: The dormant army beneath your feet - Rose Eveleth

Creativity and Imagination #5 [5 Photos]

<< Back to INDEX



  Email (shall not be published)


Notify me of new posts via email

Write your comments below:
BEFORE you post a comment:You are welcome to comment for corrections and suggestions on this page. But if you have questions please use the forum instead to post it. Thank you.


No comment yet...

Be the first to comment on this page!

 Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS   

Site design: Giorgos Lazaridis
© Copyright 2008
Please read the Terms of services and the Privacy policy