Home     Contact     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home      Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   


<< Back to INDEX

Build your own Rochester cloaking system to make objects invisible
posted December 3 2014 19:44.27 by Giorgos Lazaridis




Some time ago I posted a news article on this relatively new scientific tech. It is actually a set of four lenses with their centers aligned. The effect they create is that they light rays focus and then diverge out bending the light around a specific area. Anything that exists within this area is simply... cloaked and you still can see the background





Here is a video explaining how this phenomenon works:




Now if you want to make your own cloaking device, follow the instructions in this link.




  • Purchase 2 sets of 2 lenses with different focal lengths f1 and f2 (4 lenses total, 2 with f1 focal length, and 2 with f2 focal length)
  • Separate the first 2 lenses by the sum of their focal lengths (So f1 lens is the first lens, f2 is the 2nd lens, and they are separated by t1= f1+ f2).
  • Do the same in Step 2 for the other two lenses.
  • Separate the two sets by t2=2 f2 (f1+ f2) / (f1 14 f2) apart, so that the two f2 lenses are t2 apart.




  • Youtube user brusspup followed the instructions and this is his own Rochester cloaking device


    [Link]
     
    Share



    You might also like...


    25 coolest NASA discoveries that changed our lives [Video]

    Microchip launched MPLAB XC compilers [News]

    LHC Has Found a New Particle Unlike Any Other Form of Matter [News]

    World first: Nanobots traveled inside a living mouse to deliver medicine

    ATTN! iPhone used to steal your ATM PIN and more! [Technology]

    Add Wi-Fi® to anything with TI's Internet on a chip [News]

    Google pays $7M for privacy violations [News]

    Build your own Rochester cloaking system to make objects invisible


    << Back to INDEX



    Comments

      Name

      Email (shall not be published)

      Website

    Notify me of new posts via email


    Write your comments below:
    BEFORE you post a comment:You are welcome to comment for corrections and suggestions on this page. But if you have questions please use the forum instead to post it. Thank you.


          

    No comment yet...

    Be the first to comment on this page!












     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS   

    Site design: Giorgos Lazaridis
    © Copyright 2008
    Please read the Terms of services and the Privacy policy