Home     Contact     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
 Home      Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

<< Back to INDEX

Replacing the room lighting with LEDs [Project]
posted March 18 2013 22:05.30 by Giorgos Lazaridis

zaltdrob from Hungary decided to go green - As a starter, he replaced the lame old lamp in his room with LEDs. The room is 21 square meters and he used 84 LEDs each one rated at 1 Watt. The total luminosity is 7560 Lux.
Check out this video in which he shows step by step how he made this LED grid. He does not go deep inside electronic staff, but everyone can make an LED driver, right?

[Link: zaltdrob]

You might also like...

MCP73831/2 Li-Ion, Li-Po Miniature Single-Cell Charge Controller [Chip Ideas]

Make your DIY Fume Extractor If you Solder a Lot (or not) [Project]

Connector-less ICSP probe housed in pen [Project]

Simple Joule Thief with through-hole Inductor Works Wonders [Project]

There has to be a reason why this MnM sorting machine was made

Olinuxino Nano directly controlling 4 WS2811 LED-strips [Project]

PiPhone - A Raspberry Pi based Smartphone [Project]

High Power LED Torch out of Spray Can [Project]

<< Back to INDEX



  Email (shall not be published)


Notify me of new posts via email

Write your comments below:
BEFORE you post a comment:You are welcome to comment for corrections and suggestions on this page. But if you have questions please use the forum instead to post it. Thank you.


  • At 18 March 2013, 23:15:20 user Panagiotis Kalogeris wrote:   [reply @ Panagiotis Kalogeris]
    • REALLY AMAZING!!!!!!!!!!!

     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS   

    Site design: Giorgos Lazaridis
    © Copyright 2008
    Please read the Terms of services and the Privacy policy