Home     Contact     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
 Home      Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   

<< Back to INDEX

Impact, Vibration and Ultrasound Sensing with PVDF Piezo Sensors [Project]
posted May 21 2014 12:27.05 by spic0m

This post is about an interesting, low-cost sensor that doesn't need much processing to use, and has some unique characteristics - a PVDF (polyvinylidene difluoride) Piezoelectric sensor. The sensors looks like a small strip of plastic, and can be used for detecting movement or vibrations even into ultrasound. Such devices can help sense in many practical, real-world scenarios. They are extremely sensitive, low cost and easy to use.

Some simple practical experiments with these sensors are described, finally looking at detecting ultrasound.

"Sensors will play a big role in IoE helping to identify what is happening in the real world. I was keen to try out PVDF sensors because I think they could have a lot of applications. For example, they could be used to identify when home appliances are in use (due to vibrations), such as a washing machine, or as movement detectors (sensing people walking on a floor) or glass breaking.

There is a general overview on Wikipedia, but in summary PVDF (also known as PVF2) is a plastic that, when suitably manufactured (it is stretched, heated and an electric field applied during manufacture), becomes a piezoelectric material, meaning that it can generate a charge when some force is applied to it. It appears that stretching orientates the molecules into a common direction, and the electric field (at a temperature close to melting point) further aligns the molecules from an electrical orientation standpoint.

The PVDF sensor available from Farnell / Newark is a small sheet of the material with a layer of metal on each side and two crimped contacts (PVDF has a low melting point so be quick with the soldering iron). It is about the size of a small stamp.

There is a wealth of information for PVDF sensors here (in particular the Piezo Technical Manual on that page). It shows that PVDF has many applications including switches, impact, vibration and ultrasound."

Read the whole article here.

[Link: element 14]

You might also like...

A Website-Down-Alarm lets you know the bad news first

DIY Working Replica of the very first Telephone Ever [Project]

Building a sensitive metal detector is not that hard after all

I love seeing my circuits in professional products! [Video]

Display Temperature Humidity and Pressure on a Nokia 5110 LCD [Project]

Simple LM2585 12V to 24V 1A Step-Up (Boost) SMPS Regulator [Project]

Raspberry Pi Temperature & Humidity Network Monitor [Project]

Controlling the speed and direction of a DC motor with FPGA [Project]

<< Back to INDEX



  Email (shall not be published)


Notify me of new posts via email

Write your comments below:
BEFORE you post a comment:You are welcome to comment for corrections and suggestions on this page. But if you have questions please use the forum instead to post it. Thank you.


No comment yet...

Be the first to comment on this page!

 Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS   

Site design: Giorgos Lazaridis
© Copyright 2008
Please read the Terms of services and the Privacy policy