PAGE 4 of 5 - PCB's
|Semi Profesional PCB
3rd Row 2nd Column
|The triac board
i didn't solder the pots - i decided to set the PID factors from the software
also i soldered the polarized pin headers on the bottom side
|At 7 September 2015, 16:51:19 user Berlin_Mitte wrote: [reply @ Berlin_Mitte]|
Please provide me source code? thank you.
At 11 July 2013, 7:58:45 user Luigi wrote: [reply @ Luigi]
Pictures detailed are not available.
Hex file download need explain to describe how are created (IDE AVR STUDIO) to prform corect upload, please.
At 14 March 2013, 17:12:46 user Jay Stillz wrote: [reply @ Jay Stillz]
Do you think its possible to convert a pitbull turbo charger, pibull x3 (http://www.competitionelectronics.com/retired-rc-products.html), into a digital slodering station ??
At 23 February 2013, 10:34:29 user Michael wrote: [reply @ Michael]
@Hercules Trapierakis Can you please provide us with the source code? thanks!
At 5 September 2012, 20:44:46 user Teo wrote: [reply @ Teo]
Hi, good work!
Can you post a C code of this solder station?
Sorry, but i've arduino uno, i have flashed a bottloader into atmel 8, and i want to load the scatch on this chip.
i can't load hex code with arduino, right?
At 7 August 2012, 21:03:18 user Chris wrote: [reply @ Chris]
Hi - could you please provide me with the source code?
That knob on the front-panel - is that a potentiometer or rotary encoder?
At 6 August 2012, 2:58:59 user metal wrote: [reply @ metal]
Where can I find the source code :(
At 28 July 2012, 14:22:53 user Rohit Soni wrote: [reply @ Rohit Soni]
hey hiii... please provide me the source code for this as i m using opamp for thermocouple.... so need to apply some changes to it to work out wid pid... thanks....
At 11 April 2012, 6:53:57 user Hercules Trapierakis wrote: [reply @ Hercules Trapierakis]
use this one: Controller firmware with P = Kp * Error
the time is selected with R9
At 10 April 2012, 19:15:45 user Pantelis wrote: [reply @ Pantelis]
Hello everybody, i made this circuit but i am stacked to the hardest part of the project, i want to programm the avr. I will make this circuit on the breadboard http://electronics-diy.com/avr_programmer.php but i can't understand witch one hex to use,should i place R5-R9, i have understand what PID is ,but i don't know if its a must. If i use these i will have a better accuracy at the pointed temperature i have select?
Who can i determine the time that the solder iron will shut down?
At 24 January 2012, 9:55:08 user herctrap wrote: [reply @ herctrap]
no i haven't
but Yiannis sais that fair easy to make it
At 24 January 2012, 9:46:15 user Kammenos wrote: [reply @ Kammenos]
@herctrap have you tried this bungard sur tin?
At 23 January 2012, 23:46:53 user herctrap wrote: [reply @ herctrap]
mine with flx and solder no chemicals
search for bungard sur tin
At 23 January 2012, 10:54:16 user Kammenos wrote: [reply @ Kammenos]
@herctrap Yes we want a video with the tinning method! ;) ;) I have found some chemicals for chemical tinning, but i can only order large quantities since they are hazard liquids
At 23 January 2012, 6:30:32 user herctrap wrote: [reply @ herctrap]
yes with a lot of flux and solder
but i have learned to do it better
if you want i will make a video next time
At 22 January 2012, 23:00:59 user Kammenos wrote: [reply @ Kammenos]
@stij i suppose with the soldering iron and solder ???
At 22 January 2012, 22:50:27 user stij wrote: [reply @ stij]
how do you tin the pcb board and it is silver?
At 18 January 2012, 20:45:17 user herctrap wrote: [reply @ herctrap]
you can set easily the Kp Ki Kd factors
i actually used it as a P controller only
i didnt use the pots - i programm it from the software
At 18 January 2012, 17:19:45 user Kammenos wrote: [reply @ Kammenos]
one question, why you used potentiometers to set PID values and temp values? Any particular reason?
At 18 January 2012, 17:15:54 user Kammenos wrote: [reply @ Kammenos]
Let me say that once more: I envy the "auto turn off" function. If i had time to work with my soldering station, i would add it.
HOT in heaven!