This is a copy paste tool of George's Homemade Soldering Station
but with some improvements and not with a PIC but with an AVR ATMEGA8 uC
i have changed the way that the information is displaied
also you can adjust the P I D values
and it has a safe mode option - that it will turn off the soldering iron if it is not used for a certain amount of time Continue reading. Click here to view the . worklog
At 7 September 2015, 16:51:19 user wrote: Berlin_Mitte [reply @ Berlin_Mitte] Please provide me source code? thank you.
Email: Berlin_Mitte1@yahoo.com At 11 July 2013, 7:58:45 user wrote: Luigi [reply @ Luigi] Pictures detailed are not available.
Hex file download need explain to describe how are created (IDE AVR STUDIO) to prform corect upload, please.
Thanks. At 14 March 2013, 17:12:46 user wrote: Jay Stillz [reply @ Jay Stillz] Do you think its possible to convert a pitbull turbo charger, pibull x3 (http://www.competitionelectronics.com/retired-rc-products.html), into a digital slodering station ?? At 23 February 2013, 10:34:29 user wrote: Michael [reply @ Michael] @Hercules Trapierakis Can you please provide us with the source code? thanks! At 5 September 2012, 20:44:46 user wrote: Teo [reply @ Teo] Hi, good work!
Can you post a C code of this solder station?
Sorry, but i've arduino uno, i have flashed a bottloader into atmel 8, and i want to load the scatch on this chip.
i can't load hex code with arduino, right? At 7 August 2012, 21:03:18 user wrote: Chris [reply @ Chris] @Hercules Trapierakis
Hi - could you please provide me with the source code?
That knob on the front-panel - is that a potentiometer or rotary encoder? At 6 August 2012, 2:58:59 user wrote: metal [reply @ metal] Where can I find the source code :( At 28 July 2012, 14:22:53 user wrote: Rohit Soni [reply @ Rohit Soni] hey hiii... please provide me the source code for this as i m using opamp for thermocouple.... so need to apply some changes to it to work out wid pid... thanks....
email@example.com At 11 April 2012, 6:53:57 user wrote: Hercules Trapierakis [reply @ Hercules Trapierakis] @Pantelis
use this one: Controller firmware with P = Kp * Error
the time is selected with R9 At 10 April 2012, 19:15:45 user wrote: Pantelis [reply @ Pantelis] Hello everybody, i made this circuit but i am stacked to the hardest part of the project, i want to programm the avr. I will make this circuit on the breadboard http://electronics-diy.com/avr_programmer.php but i can't understand witch one hex to use,should i place R5-R9, i have understand what PID is ,but i don't know if its a must. If i use these i will have a better accuracy at the pointed temperature i have select?
Who can i determine the time that the solder iron will shut down? At 24 January 2012, 9:55:08 user wrote: herctrap [reply @ herctrap] @Kammenos
no i haven't
but Yiannis sais that fair easy to make it At 24 January 2012, 9:46:15 user wrote: Kammenos [reply @ Kammenos] @herctrap have you tried this bungard sur tin? At 23 January 2012, 23:46:53 user wrote: herctrap [reply @ herctrap] @Kammenos
mine with flx and solder no chemicals
search for bungard sur tin At 23 January 2012, 10:54:16 user wrote: Kammenos [reply @ Kammenos] @herctrap Yes we want a video with the tinning method! ;) ;) I have found some chemicals for chemical tinning, but i can only order large quantities since they are hazard liquids At 23 January 2012, 6:30:32 user wrote: herctrap [reply @ herctrap] @stij
yes with a lot of flux and solder
but i have learned to do it better
if you want i will make a video next time At 22 January 2012, 23:00:59 user wrote: Kammenos [reply @ Kammenos] @stij i suppose with the soldering iron and solder ??? At 22 January 2012, 22:50:27 user wrote: stij [reply @ stij] how do you tin the pcb board and it is silver? At 18 January 2012, 20:45:17 user wrote: herctrap [reply @ herctrap] user friendly
you can set easily the Kp Ki Kd factors
i actually used it as a P controller only
i didnt use the pots - i programm it from the software At 18 January 2012, 17:19:45 user wrote: Kammenos [reply @ Kammenos] one question, why you used potentiometers to set PID values and temp values? Any particular reason? At 18 January 2012, 17:15:54 user wrote: Kammenos [reply @ Kammenos] Let me say that once more: I envy the "auto turn off" function. If i had time to work with my soldering station, i would add it.
H O T in eaven! h