Ok, I've got the air accumulator and fits to my requirements. Now i need an air compressor. Usually, this is the most expensive part. But one day, i was in a shop looking for something, and saw an air compressor for car tires, it was on sales - I got it for some 8.5 Euro. I had no idea what i was going to do it by then, but now i do!
According to the specifications:
Operation voltage: 12V
Max pressure: 18 bar
Max continuous operation: 10 minutes followed by 20 minutes cool down
50% of its volume is thin air... The real compressor is a small mechanism inside
@George Actually, i'm building my pneumatic solder paste dispenser. My next addition will be the smd pick-and-place, for which i already have the pump (USD4) and a manual dispenser (USD 2) which i will hack. Both the solder paste dispenser and the pick and place will be housed under the same box, will have the same foot pedal for operation, and will have a switch to choose which one i currently use.
At 17 September 2012, 23:12:25 user George wrote: [reply @ George]
Het Kam, whilst you are building your smd 'picker', here's a cheap one you could use, looks like it's using a modified fish aquarium pump for the vacuum
Home
Projects
Experiments
Circuits
Theory
BLOG
PIC Tutorials
Time for Science
Contact
Forum
RSS
Reddit this
HOT in heaven!
NEW in heaven!
