Home     Contact     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS     Terms of services     Privacy policy  
   
 Home      Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science   



This project is not completed yet - Last update: June 19, 2014
Lab Power Supply 0-20V 10mA-2AAuthor
Zoran Petkovic
June 5, 2012

PAGE 2 of 4 - General WARNING


WARNING


Part of this circuit is connected to the mains electricity which can be lethal proceed with caution !


A few advices about working with mains:

  • Always ground conductive parts of your working area, your project boxes or whatever is conductive and can get in contact with mains electricity.

  • Always check that you have disconnected mains voltage physically NOT with a switch or any other mechanical/electronic way before you go in with your hands. its not uncommon for switches to fail also some switches only disconnect one line and in countries like mine you can turn around the plug in your wall so if you turn around the plug you can get live wire still present even with the switch being off

  • If you need to take measurement of high voltages make sure your equipment is rated for such measurement and is undamaged








  • Continue reading. Click here to go to the next page >>>.
     OR click here to view the presentation.



    Comments

      Name

      Email (shall not be published)

      Website

    Notify me of new posts via email


    Write your comments below:
    BEFORE you post a comment:You are welcome to comment for corrections and suggestions on this page. But if you have questions please use the forum instead to post it. Thank you.


          

  • At 12 June 2015, 17:27:05 user Wiki wrote:   [reply @ Wiki]
    • This power supply can be used to power amplifiers or lab, because the LM723 is a very good voltage regulator, with good specifications, like noise figure. It has sense voltage, feedback, overall protection. It is a way good comparing to LM317 series. It can be used for a final year project at university, if it has a documentation. I've seen at my university, final year projects like power supply with digital view of voltage.


  • At 26 February 2015, 7:23:46 user Zoran Petkovic wrote:   [reply @ Zoran Petkovic]
    • I uploaded PDF with my second populated unit pictures ( On presentation page click download file) it should be easy to build in one go but if you have questions ask them in comments ill spare some time to answer.


  • At 25 February 2015, 17:47:39 user Gamini wrote:   [reply @ Gamini]
    • Dear Zoran,
      Oh, Very sorry to here this. Now you're paying for some others mistake, But appreciate your courage. Wish you good luck and Gods; Blessings.

      Bes regards

      Gamini


  • At 22 February 2015, 14:00:42 user Zoran Petkovic wrote:   [reply @ Zoran Petkovic]
    • 3 months ago my house caught fire from neighbours burning house resulting in my house burning down to along with the computer with files for this build, my prototype burned down also but i redone schematic and even built a new unit i can post schematic PCB files and silk screen files AS IS. for now i cant write any text for it, at the moment im working 2 jobs to rebuild my home. anyway ill post files in PDF and they will be on first page


  • At 22 February 2015, 12:46:57 user Gamini Patabendige wrote:   [reply @ Gamini Patabendige]
    • Dear Sir,
      This is a very interesting and usefull project. When can you post the balance content?
      Best regards


  • At 12 December 2014, 22:01:51 user electronics-student-from-spain wrote:   [reply @ electronics-student-from-spain]
    • Any news? I'm a newbie electronics student at an electronics vocational trainingschool, I can get most parts cheaply or for free at the lab. I have zero incomes, so I must get smart and do my equipment in the DIY way.


  • At 12 September 2014, 20:03:01 user Zoran Petkovic wrote:   [reply @ Zoran Petkovic]
    • @george schematic have some mistakes also the pcb, once i get time to fix the files will write complete text im sorry i couldn't do this in one go but work i do demands a lot of my time stay tuned the prototype works really well will be worth waiting


  • At 12 September 2014, 18:15:00 user Giorgos Lazaridis wrote:   [reply @ Giorgos Lazaridis]
    • @george click on the worklog tab, you will find everything there


  • At 11 September 2014, 20:03:09 user george wrote:   [reply @ george]
    • Did you finish it? Where are the plans? How does it work?



    delicious
    digg
    reddit this Reddit this
    Faves



     HOT in heaven!


    NEW in heaven!



    New Theory: AC electric motor working principle



     Contact     Forum     Projects     Experiments     Circuits     Theory     BLOG     PIC Tutorials     Time for Science     RSS   

    Site design: Giorgos Lazaridis
    © Copyright 2008
    Please read the Terms of services and the Privacy policy